Concrete Repair Posts

Stitching for Structural Concrete Repair

Posted by John Bors on Tue, Jul 31, 2012 @ 18:07 PM

stitching with epoxyAfter concrete is placed in service, unforeseen uses or conditions can affect its performance or cause damage, especially across cold joints or control joints. If the overload or temporary condition is excessive, new cracks can form and there can be displacement of the crack or joint. A few examples include temporary weight overloads, poor subsurface compaction or soils, changes in water tables, subsidence and changes in use. Damages resulting from these changes must be repaired and the repairs may include additional strengthening in the concrete restoration or repair project.

Is there a simpler, low cost method to provide additional support to existing structures?

Yes, the non-proprietary procedure is a related to steel plate bonding and it is commonly called rebar stitching. It may often be an efficient alternative to glass or carbon fabric wrapping, but since no company is actively marketing it, often the structural engineer or architect doesn’t even consider it. The repair is often fast, inexpensive and requires no special tools. And the procedure stands the test of time: the pictoral diagram is from an old US Army Corp of Engineers concrete restoration design from the early 1960's.

Installation is straightforward. First, it is critical to know the depth of coverage (and possibly the location) of the existing reinforcing steel so that the old reinforcement is not damaged during the installation of stitches (note that some concrete is unreinforced so this concern may not exist). The location of structural steel is listed on the orginal design drawings. The architect or engineer calculates a requirement for increased strength, estimates a safety factor and then develops a pattern of steel or FRP reinforcing bar to be installed. The contractor saw cuts channels at specified depths in the concrete surface, ties the bar together at intersections, then fills the channel with a structural liquid epoxy or paste epoxy adhesive. If the channel lies on a horizontal deck, the filling is by gravity, otherwise the channel may need to be sealed with a temporary overlying form so the epoxy paste or liquid can be pumped into the hollow space. Unlike fiber wrapping systems, dowel holes can be drilled in any direction to better anchor the bar placed in the surface channels and the bar can cross the joint or crack at any angle. CCS Bonder Liquid LWL and CCS Bonder Paste LWL are two structural epoxy adhesives frequently used for this application.

What type of repair might qualify as a candidate for rebar stitching? Parking and bridge decks, slab on pan floors, locally overloaded areas, missing or insufficient rebar, anchoring large patches and spall repairs to sound concrete, beams and piers all might be excellent stitching applications. Stitching benefits include: a) fast installation, b) localized repairs, c) low material and labor costs, d) no special equipment required, e) damp and wet substrates are OK and f) repaired surface can bear traffic.

Call or write us if you need an adhesive recommendation or more practical tips for stitching.

Tags: stitching, epoxy concrete repair, concrete repair